Filter
Top Products
Chapter 14 –
System Maintenance
14-6
Maximum Bandwidth (RMX 1000 Rev A only)
RMX 1000 Rev A's users can set whether to enable the 4M bandwidth
capability when the system communicates with participants. To enable the
4M bandwidth, click "Max Bandwidth" on the Customization interface, and
then select "Support 4M bandwidth".
• If the 4M bandwidth is selected, at most 48 video resources are available.
• Max Bandwidth is available only when your RMX 1000 Rev A supports more
than 64 video resources.
Security Setting
RMX provides multiple security setting options. A user can limit the H.323
connection to the system PCM, limit the LAN port that accesses the Web
management interface, and configure the Security Socket Layer (SSL) digital
certificate to ensure data transfer security at the time of Web communication.
Click the "Setup->Security Setting" menu item at the upper left part to enter
the Security Setting interface.
Security Setting Page
You can set the following security restrictions:
• Deny lobby access to endpoints calling through the following
interface: Select the LAN1 or LAN2 check box. Then, the endpoint device
connected to this port cannot dial in to the PCM lobby through the IP
address or E.164 prefix of RMX. However, you can still directly dial in to
the conference by calling “RMX IP address/E.164 + SIP URL +
conference ID”.
• Deny management through the following interface: Select the LAN1 or
LAN2 check box. Then, your computer cannot log into the Web UI
through the IP address of this LAN port. LAN 1 and LAN 2 ports
shouldn’t be disabled at the same time. If only one LAN port is enabled,
the setting here is not allowed.