Filter
Top Products
Chapter 11 –
IP Network Services
11-6
In the "IP Network Services" interface, click "SIP Server" to configure SIP
server parameters.
IP Service – SIP Server
Configuration Description of SIP Server Parameters
Parameter
Description
IP Network Type
Set the IP network type for the RMX system to make a call.
You need to set it based on the call type used for the
participant's endpoint. It can be set to:
•
H.323
：
Only the H.323 call is supported.
•
SIP
：
Only the SIP call is supported.
•
H.323 & SIP:
The H.323 call and SIP call are supported
at the same time.
Settings of the SIP server related parameters are available
only when the STP-supporting network type is selected.
Transmission Type
Set the transport layer protocol used for communicating
with the SIP server. It needs to be consistent with the
protocol supported by the SIP server.
Registration with the
server
Specifies whether to register RMX to the specified SIP
server. You need to set the SIP server related parameters
after this function is enabled.
Preferred/Alternate
Server
Displays the registration status of the SIP server.
When registration of the preferred server fails, the alternate
server will function as the current in-use SIP server.
Server Address
Provides the IP address of SIP server for registration
service.
Server Port
Provides the connection port of SIP server for registration
service.