Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
8-11
Configure the parameters according to the table below:
LDAP Configuration Parameters
Parameter Description
Server IP address of the LDAP directory server
Server Port LDAP server port No.
Base DN
(Distinguished
Name)
LDAP Base DN
Authentication
Type
LDAP authentication type. Depending on different
authentication types selected by users, the system requires
configuring different options.
Use SSL (Security
Socket Layer)
Specify whether to use SSL secure transmission or not.
Domain Name LDAP server domain name
Bind DN
(Distinguished
Name)
LDAP bind DN
User Name User name of the LDAP directory
Password Enter the password (if available) of LDAP directory.
After the configuration is finished, will be displayed if the directory
service is successfully registered, or else is displayed.
Viewing the Global Directory
After the directory server is successfully registered, the global directory
buttons ( ) on the address book pane will be activated. The
table below defines the functions of these buttons:
Function Definitions of Global Directory Buttons
Button
Function
The global directory will be automatically refreshed at regular intervals
to synchronize the address change on the directory server. You can
click this button to manually refresh the global directory.
This button is available when the global directory list is displayed. Click
this button to switch to the local directory list.
This button is available when the dynamic GAB address is displayed.
Click this button to switch to the dynamic GAB address.
Display the local and dynamic GAB directory lists.
Click the button on the address book pane to display the global
directory list, as shown below. The list shows the information of other
endpoint sites registered to the directory server. The green icon indicates that