Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
18-5
The system displays the prompt message "Are you sure?". Key in "Y" to
proceed, or key in "N" to cancel the setting.
Telnet Setting
Key in "telnet {on | off}" after the prompt "#" to turn on/off the telnet session.
For example, enter telnet on to enable the telnet function.
The default setting is telnet on.
If "telnet off" is entered to disable RMX’s telnet function,
the user can only use the s
erial port to perform above system setting tasks. The default
telnet port is 23, which cannot be modified. The password and command operations for
remote telnet login are identical to those for serial port login.
Password Modification
Key in "password" after the prompt "#" to modify the login password for the
command setting interface.
The password can be set to a maximum of 20 characters. This command is
only used to change the login password for the telnet session and serial
interface. No effect for the web UI password.
Ping
Key in "ping <ip> {-n<count>} {-w<time>} {-l<size>}" after the prompt "#" to
view the network connection status.
Parameters Description
Parameter Description
ip IP address of the destination host
-n<count> Packet sending times, defaulted to 10
-w<time>
Waiting time, defaulted to 1000 ms
-l<size>
Size of the sent packet, defaulted to 32 bytes
[Example] Send the host whose IP address is 172.21.100.111 a Ping packet
with the size of 1500 bytes for five times cyclically. The wait time is 1000 ms: