Filter
Top Products
Chapter 2 –
First Time Installation and Configuration
2-2
Place RMX on the rack.
― Put the RMX on a safe, even, and clean surface.
3 Connect cables on the back panel of the RMX:
― Power Cable: Firmly insert the plug into the power socket to prevent
poor contact.
― LAN Cable: Connect to the LAN1 port of the RMX 1000.
Before powering off, first switch off the device. Do not directly cut off the power supply
or unplug the power cable.
Configuration Preparations
Obtaining Network Information
Before the first time configuration, obtain the information below from the
network administrator in order to configure the RMX on your local network:
• The IP network type (H.323, SIP or H.323&SIP) and related configuration
information.
• The IP address, subnet mask, and default gateway IP address of the RMX
LAN port.
• (Optional) DNS server address.
• (Optional) Gatekeeper address, and the H.323 prefix and E.164 number to
be assigned to the RMX.
• (Optional) SIP server address