Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
14-3
To set the system time, click the menu options Setup->RMX Time on the
top-left of the page. The system time setup page opens.
System Time Setup Page
This page shows the date and time of the system and the user computer. You
can set up the system time in one of the following methods:
• Synchronize with a network time server
Select the "Manually Synchronize Device Time with a Time Server"
option to synchronize the system time with a network time server. In this
case, enter the IP address or domain name for the time server in the
"Time Server" field.
• Synchronize with the user PC
Select the Synchronize Date & Time on My PC option to synchronize the
device time with the connected user PC, and then click the Synchronize
button to proceed with the synchronization.
You cannot perform the time synchronization operation if there is an ongoing
conference on the system. You should terminate the conference before activating the
Synchronize button.
Customization
You can customize the following language settings for the device: the
language of the menus to be displayed for the endpoints' PCM and the IVR
voice prompt language. You can also change the device’s system name,
customize the user interface and the skin of conference image, etc. To proceed
with the customization, click the menu options "Setup->Customization" on
the upper left part of the page to enter the customization page.