Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
2-7
Gatekeeper Setting
Parameter Description
IP Network Type
Set the IP network type for the RMX system to make a
call. You need to set it based on the call type used for the
participant's endpoint. It can be set to:
•
H.323:
Only the H.323 call is supported.
•
SIP:
Only the SIP call is supported.
•
H.323 & SIP:
The H.323 call and SIP call are supported
at the same time.
Settings of the gatekeeper-related parameters are
available only when the H.323-supporting network type is
selected.
Registered Gatekeeper
Set whether or not to register with the gatekeeper. You
must check this option to set the parameters that follow.
Primary (or Alternate)
Gatekeeper
Indicate whether or not the system is registered with the
primary or alternate gatekeeper.
IP Address for the
Gatekeeper
Set the IP address for the primary or alternate gatekeeper.
Port Number for the
Gatekeeper
The port number for the primary or alternate gatekeeper.
System prefix/E164. Set the E.164 number for the system.
H.323Alias
Set the H.323 alias for the system.
6 If your IP network type is H.323 only, go to Step 8.
7 To configure the SIP server, click the "SIP Server" tab, and configure
related parameters in accordance with the table below:
IP Network Services – SIP Server Setting