Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
21-8
Number of Meeting Rooms Multi-screen Layout
10
11-13
14-16
16+
Dial-in Number
For an H.323 endpoint, if the endpoint has been registered to the same
gatekeeper as RMX, the dial-in number consists of the E.164 prefix of RMX
and conference information, such as the conference ID, conference password,
chairperson password and participant address, in the form below:
<RMX E.164 prefix>[Conference ID][##Conference
password][##Chairperson password][*participant's E.164 prefix]
Here, the character within the <> symbols are mandatory, and those within
the [ ] symbols are optional.
For example:
RMX E.164 prefix: 925
ID of the conference to be created: 1001
The table below shows the strings dialed by the endpoint under different
scenarios:
H.323 Endpoint's Dial-in Numbers – Registered to a GK
Scenario
Dial-in String
Create this conference 9251001
Create this conference and set:
Conference password: 1111
Chairperson password: 2222
9251001##1111##2222
Create this conference and invite:
Participant 1 - E.164/TEL URI：123
Participant 2 - E.164/TEL URI：321
9251001*123*321
Create this conference, set the
above passwords and invite
participants
9251001##1111##2222*123*321
If the gatekeeper is not configured on the network, the format of the dial-in
string is as follows:
<RMX IP address>[##<Conference ID>][##Conference
password][##Chairperson password][*participant's IP address]
Here, the character within the <> symbols are mandatory, and those within
the [ ] symbols are optional.