Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
3-7
rule varies, depending on the user's endpoint type, whether the conference
password and chairman password need to be created, and whether other
participants will be invited.
H.323 Endpoint
For an H.323 endpoint, if the endpoint has been registered to the same
gatekeeper as RMX, the dial-in number consists of the E.164 prefix of RMX
and conference information, such as the conference ID, conference password,
chairperson password and participant address, in the form below:
<RMX E.164 prefix>[Conference ID][##Conference
password][##Chairperson password][*participant's E.164 prefix]
Here, the character within the <> symbols are mandatory, and those within
the [ ] symbols are optional.
For example:
RMX E.164 prefix: 925
ID of the conference to be created: 1001
The table below shows the strings dialed by the endpoint under different
scenarios:
H.323 Endpoint's Dial-in Numbers – Registered to a Gatekeeper
Scenario
Dial-in String
Create this conference
9251001
Create this conference and set:
Conference password: 1111
Chairperson password: 2222
9251001##1111##2222
Create this conference and invite:
Participant 1 - E.164/TEL URI：123
Participant 2 - E.164/TEL URI：321
9251001*123*321
Create this conference, set the
above passwords, and invite
participants
9251001##1111##2222*123*321
If the gatekeeper is not configured on the network, the format of the dial-in
string is as follows:
<RMX IP address>[##<Conference ID>][##Conference
password][##Chairperson password][*participant's IP address]
Here, the character within the <> symbols are mandatory, and those within
the [ ] symbols are optional.
For example:
RMX IP address: 172.22.30.40
ID of the conference to be created: 1001
The table below shows the strings dialed by the endpoint under different
scenarios: