Filter
Top Products
05_PrintRef-DocProperties.fm Modified: 8/7/02
Template Version 1.0
GL-1020 Operator’s Guide (Basic) 119
Number of copies—selects the number of copies to print. You can
also press Alt + N.
Fragment of the Setup page showing the sort icon
Sort icon—shows the type of sort. This option is disabled if
stapling is on. Clicking the icon cycles through the available valid
options.
Finishing—depending on the finishing unit(s) installed on the
copier, this option selects from among the various finishing
options: Staple and Hole Punch. You can also press Alt + T to
select stapling and Alt + H to select hole punching.
Fragment of the Setup page showing the finishing icon
Finishing icon—shows the selected stapling and hole punch
positions. You cannot click this icon. It shows a representation of
the current selection for the staple position, hole punch position
or both.
If the staple or hole punch option is not installed, the drop-down
list is disabled.
Staple has higher priority than hole punch. Selecting a staple
position determines the available hole punch positions. The
positions are:
Print Profile—provides access to a predefined set of driver
properties that allow you to auto-configure print jobs.
Stapling and Hole Punching Positions
Stapling Option Available Hole Punch Positions
None
None, top, left
Upper left
None, top, left
Top (double)
None, top
Upper right
None, top
Left (double)
None, left
Sort icon
Finishing icon