Filter
Top Products
07_ContFAQ.fm Modified: 8/7/02
Template Version 1.0
30 GL-1020 Operator’s Guide (Basic)
Rebooting procedure if all else fails
If you can’t reboot the preferred way, do the following:
1Press
PRINTER/NETWORK, holding down the button for at least
10 seconds
.
2Press START.
The controller reboots.
Warning! Do NOT reboot the controller unless absolutely
necessary. Any job currently being processed will be lost
during the rebooting process.
How Do I Shut Down the GL-1020?
To power down the system safely, start by shutting down the
controller from the copier’s control panel. After you have shut
down the controller, you can safely power off the copier.
Shutting Down the Controller
Never power off the controller by flipping the power switch to the
OFF position. This may damage the controller’s hard disk drive
or corrupt the GL-1020 software.
Instead, power down the controller from the copier’s LCD touch
screen, using the Shut Down function.
1Press
PRINTER/NETWORK.
2Press
PRINT.
The main Print
menu opens.
Sample Print menu