Filter
Top Products
04_NetworkingClientSoftware.fm Modified: 8/7/02
Template Version 1.0
GL-1020 Operator’s Guide (Basic) 33
INSTALLING WINDOWS
®
SOFTWARE
The basic GL-1020 client software includes the GL-DocMon
print job monitoring utility, printer drivers for PCL and PostScript
(PS), the GL-TWAIN driver, and the AGFA Font Manager.
Considerations and Limitations
n The GL-DocMon utility monitors only GL-1020, GL-1010,
and SC-2 devices. It does not support any third party printer
drivers. GL-DocMon cannot locate or interrogate the
controller if it has been set up as a NetWare NDPS printer or
NPRINTER.
n End users must install a GL-1020 printer driver and map it to
the GL-1020 controller in order to access it using
GL-DocMon.
n Users can view all jobs in the print queue, including
controller-resident jobs, but can only delete their own jobs.
Prerequisites
Make sure that the client workstation meets the following
minimum requirements:
n Windows
®
98
w Novell Client v3.1 and Client Service Pack 1 are required
to run IPX-based SNMP access and Novell printing.
w The Microsoft Client for NetWare may be used instead of
the Novell Client except for NDPS printers.
n Windows
®
Me
w Novell Client v3.3 is required to run IPX-based SNMP
access and Novell printing.
w The Microsoft Client for NetWare may be used instead of
the Novell Client except for NDPS printers.
n Windows NT
®
4.0
w Microsoft Service Pack 5 or higher
w Novell Client v4.6 or higher with Z.E.N works Starter
Pack and Service Pack 1 are required to run IPX-based
SNMP access and Novell printing.
w The Microsoft Client for NetWare may be used instead of
the Novell Client except for NDPS printers.