Filter
Top Products
04_DocMonSetup.fm Modified: 8/7/02
Template Version 1.0
GL-1020 Operator’s Guide (Basic) 177
4 In the Rates dialog box, click and drag the slider along the
scale to set the rate from zero (0) seconds (left end) to the
maximum rate (right end). The rate appears in the box below
as you slide the slider.
w If you set the rate to zero, GL-DocMon will not update
the screen.
w The maximum rate is different for each item: event noti-
fications, printer status, and print queue.
5Click
OK to confirm the new rate and return to the Refresh
Rates dialog box.
6 To close the Rates dialog box without setting a new rate, click
Cancel.
This also returns you to the Refresh Rates dialog box.
7 From the Refresh Rates dialog box, click
OK to set the rate
and exit the Configuration window.
8 To use the default rates for all items, click
Restore Defaults,
then click
OK to apply the default rates and exit the
Configuration window.
FINDING THE PRINTER'S ADDRESS
1Click the
Discovery tab.
The Discovery dialog box appears. The Discovery dialog box
contains a list of all printers installed on your computer along
with their address.
2 To update one of the listed printers, just click the desired
printer driver and then click
Update.
3Click
OK to accept the new setting and close the
Configuration window.