Filter
Top Products
06_PrintPostScript.fm Modified: 8/7/02
Template Version 1.0
162 GL-1020 Operator’s Guide (Basic)
USING POSTSCRIPT PASS-THROUGH
1Click
PostScript Settings.
2 Check Use PostScript Pass-through to bypass the driver’s
PostScript engine and use the application’s instead.
3Click
OK to return to the properties tab.
4Click
OK to return to the print window.
USING ADSC
1Click
PostScript Settings.
2 Check Use Adobe Document Structuring Convention to print
each page of a print job as a self-contained job.
3Click
OK to return to the properties tab.
4Click
OK to return to the print window.
CHOOSING A POSTSCRIPT OUTPUT PROTOCOL
1Click
PostScript Settings.
2 Select the desired output protocol.
3 Select ASCII Data to send all data using the Adobe
Communication Protocol.
This allows you to print the data to any printer.
4 Select Tagged BCP to send all data, except special characters,
in binary (8-bit) format.
This option passes data to the printer faster than sending it in
ASCII data mode.
5Click
OK to return to the properties tab.
6Click
OK to return to the print window.
COMPRESSING BITMAPS
1Click
PostScript Settings.
2 Check Compress Bitmaps to reduce the time required to
transfer your print job to the printer.
3Click
OK to return to the properties tab.
4Click OK to return to the print window.