Filter
Top Products
E6580757
F-18
6
6.6.2 Run/stop control with frequency setting signals
: Operation starting frequency
: Operation starting frequency hysterisis
• Function
The Run/stop of operation can be controlled simply with frequency setting signals.
[Parameter setting]
Title Function Adjustment range Default setting
Operation starting frequency
0.0 ∼ (Hz)
0.0
Operation starting frequency hysterisis
0.0 ∼ (Hz)
0.0
Output frequency [Hz]
Frequency command value
The inverter begins accelerating after
the frequency setting signal has
reached point B. Deceleration begins
when the frequency setting signal
decreases below point A.
6.7 DC braking
6.7.1 DC braking
: DC braking starting frequency
: DC braking current
: DC braking time
• Function
A large braking torque can be obtained by applying a direct current to the motor. These parameters
set the direct current to be applied to the motor, the application time and the starting frequency.