E6580757
F-52
6
1) Display in percentage terms 2) Display in amperes/volts
Output current:
Output current:
Input (DC) voltage:
Input (DC) voltage:
(vale of changing to AC)
■ An example of setting for displaying the motor speed or load speed
Set to either " " or " ".
The value obtained by multiplying the displayed frequency by the
-set value will be displayed as fol-
lows:
Value displayed = Monitor-displayed or parameter-set frequency ×
1) Displaying the motor speed
To switch the display mode from 60Hz (default setting) to 1800min-1 (the rotating speed of the 4P mo-
tor)
2) Displaying the speed of the loading unit
To switch the display mode from 60Hz (default setting) to 6m/min-1 (the speed of the conveyer)
Note: This parameter displays the inverter output frequency as the value obtained by multiplying it by a
positive number. Even when the actual speed of the motor changes according to the particular
changes in load, the output frequency will always be displayed.