Toshiba VF-S9 Power Supply User Manual


 
E6580757
C-8
3
(2) Setting the frequency using the operation panel ( )
Set the frequency from the operation panel.
: Moves the frequency up
: Moves the frequency down
Example of operating a run from the panel
Key operated LED display Operation
Displays the operation frequency.
(When standard monitor display selection is set to 0 [opera-
tion frequency])
Set the operation frequency.
Press the ENT key to save the operation frequency. and the set
frequency are displayed alternately.
Pressing the key or the key will change the operation frequency
even during operation.
(3) Setting the frequency using external signals to the terminal board ( )
Frequency setting
1) Setting the frequency using external potentiometer
* The input terminal VIB can be used in the same way and VIA and VIB are automatically
switched by the default settings. Set parameters to specify priority. For more details, see
6.5.
Note:The VIA terminal and II terminal cannot be used at the same time.
* Potentiometer control
Set frequency using the potentiometer (1~10k-
1/4W)
For more detailed information on adjustments,
see 6.5.
Setting frequency using
the potentiometer
Frequency
50Hz or 60Hz
B