Filter
Top Products
E6580757
H-4
8
Error code
Communi-
cation No.
Description
(*) 0 No error
(Note) Past trip records (trip records retained or trips that occurred in the past) can be called up. (Refer to 8.1
"Status monitor mode" for the call-up procedure.)
(*) Strictly speaking, this code is not an error code; this code is displayed to show the absence of error
when the past trip monitor mode is selected.
■ Example of call-up of trip information
Item displayed
Key
operated
LED
display
Communi-
cation No.
Description
Status monitor mode (The code blinks if a trip oc-
curs.)
The motor coasts and comes to a stop (coast
stop).
Parameter setting
mode
The first basic parameter "Automatic accelera-
tion/deceleration ( )" is displayed.
Operation fre-
quency
FE00
The operation frequency at the occurrence of a trip
is displayed.
Direction of rota-
tion
FE01
The direction of rotation at the occurrence of a trip
is displayed. ( : forward run, : reverse run)
Operation fre-
quency command
FE02
The operation frequency command value at the
occurrence of a trip is displayed.
Load current FE03
The inverter output current at the occurrence of a
trip is displayed. (Default setting: unit %)
Input (DC) voltage FE04
The inverter input (DC) voltage at the occurrence
of a trip is displayed. (Default setting: unit %)
Output voltage FE05
The inverter output voltage at the occurrence of a
trip is displayed. (Default setting: unit %)
Input terminal FE06
The ON/OFF status of each of the control signal
input terminals (F, R, RST, S1, S2 and S3) at the
occurrence of a trip is displayed in bits.
ON:
OFF:
Output terminal FE07
The ON/OFF status of each of the control signal
output terminals (RY, OUT and FL) at the occur-
rence of a trip is displayed in bits.
ON:
OFF:
CPU version FE08 The version of the CPU is displayed.
(Continued overleaf)
Input terminal
(
S3
)
Input terminal
(
S2
)
Input terminal (F)
Input terminal (R)
Input terminal (RST)
Input terminal (S1)
Output terminal (FL)
Output terminal (OUT)
Output terminal
(RY)
*1