Filter
Top Products
E6580757
D-2
4
4.1 How to set parameters
Setting monitor mode
The standard default parameters are programmed before the unit is shipped from the factory. Parameters can be
divided into three major categories. Select the parameter to be changed or to be searched and retrieved.
Basic parameters
: The basic parameters that must be programmed be-
fore the first use.
Extended parameters
: The parameters for detailed and special setting.
User parameters
(automatic edit function)
: Indicates parameters that are different from the stan-
dard default setting parameters. Use them to check
after setting and to change setting.
(Parameter title: )
Setup parameters
: When the standard setting is entered, this
parameter is displayed.
* Adjustment range of parameters
: An attempt has been made to assign a value that is higher than the programmable range. Or, as a
result of changing other parameters, the programmed value of the parameter that is now selected
exceeds the upper limit.
: An attempt has been made to assign a value that is lower than the programmable range. Or, as a
result of changing other parameters, the programmed value of the parameter that is now selected
exceeds the lower limit.
If the above alarm is flashing on and off, no setting can be done of values that are equal to or greater
than or equal to or lower than .
While these codes are flashing on and off, no change can be made to any parameter.