Toshiba VF-S9 Power Supply User Manual


 
E6580757
C-9
3
2) Setting the frequency using input voltage (0~10V)
* The input terminal VIB can be used in the same way. VIA and VIB are automatically switched
by the default settings. Set parameters to specify priority. For more details, see 6.5.
Note:The VIA terminal and II terminal cannot be used at the same time.
3) Setting the frequency using current input (4~20mA)
* Setting of parameters also allow 0-20mAdc.
Note:The VIA terminal and II terminal cannot be used at the same time.
* voltage signal
Setting frequency using voltage signals (0~10V). For
more detailed information on adjustments, see 6.5.
Voltage signal 0-10Vdc
Frequency
* Current signal
Setting frequency using current signals (4~20mA). For
more detailed information on adjustments, see 6.5.
Current signal 4-20mAdc
Frequency
50Hz or 60Hz
50Hz or 60Hz