Filter
Top Products
E6580757
F-53
6
* The converts the following parameter settings:
• A display Current monitor display
Motor electronic thermal protection level 1/2
( ),
DC braking current
Stall prevention level
Small current detection level
• V display Voltage monitor display
Torque boost 1/2 ,
• Free unit Frequency monitor display
Frequency-related parameters , , , , ∼ ,
∼ , , , ,
, , , , ,
, , , , ,
∼ ,
6.16.3 Changing the status monitor display format
: Standard monitor display selection
• Function
This parameter specifies display format while power is on.
■ Changing the display format while power is on
When the power is on, the standard monitor mode displays the operation frequency (default setting) in the
format of "
" or " ". This format can be changed to any other monitor display format by setting
. This new format, however, will not display an assigned prefix such as " " or " ".
• Standard monitor mode ⇒ Standard monitor display selection (
)
Title Function Adjustment range Default setting
Standard monitor display se-
lection
0: Operation frequency (Hz/Free unit)
1: Output current (%/A)
2: Frequency command (Hz/Free unit)
3: Inverter rated current (A)
4: Inverter overload factor (%)
5: Output power (%)
0