Filter
Top Products
E6580757
H-2
8
(Continued)
Item displayed
Key
operated
LED
display
Communi-
cation No.
Description
CPU version FE08 The version of the CPU is displayed.
Memory version FE09 The version of the memory mounted is displayed.
Past trip 1 FE10
Past trip 1 (displayed alternately at 0.5-sec. inter-
vals)
Past trip 2 FE11
Past trip 2 (displayed alternately at 0.5-sec. inter-
vals)
Past trip 3 FE12
Past trip 3 (displayed alternately at 0.5-sec. inter-
vals)
Past trip 4 FE13
Past trip 4 (displayed alternately at 0.5-sec. inter-
vals)
Cumulative
operation time
FE14
The cumulative operation time is displayed. (0.01
corresponds to 1 hours.)
Torque current FE20 The torque current is displayed in %.
PI feedback FE22
The PI feedback value is displayed.
(Unit: processed amount)
Inverter load factor FE26 The inverter load factor is displayed in %.
PBR overload
factor
FE28
The overload factor of the braking resistor is dis-
played in %.
Output power FE30 The inverter output power is displayed in %.
Default display
mode
The operation frequency is displayed
(during operation).
Note 1: Press the or key to change items displayed in the status monitor mode.
Note 2: With the current unit selection parameter or voltage unit selection parameter, you can choose between
percentage and ampere (A) for current or between percentage and volt (V) for voltage, respectively.
Note 3: The input (DC) voltage displayed is 1/
2
times as large as the rectified dc input voltage.
Note 4:
is displayed to show the absence of error.
Note 5: The cumulative operation time increments only when the machine is in operation.
Note 5
Note 4
Note 4
Note 4
Note 4