Filter
Top Products
E6580757
F-32
6
[0: Supply voltage uncorrected,
output voltage limited]
Output voltage
[V]
Input voltage
Input voltage
Low
High
Output frequency
* The above applies when V/F control mode
selection parameter is set to "0" or "1".
the output voltage can be
prevented from exceeding the
input voltage.
Rated voltage
Rated voltage
×
1
Output voltage
[V]
Input voltage
Low
High
Output frequency
[1: Supply voltage corrected,
output voltage limited]
[3: Supply voltage uncorrected,
output voltage unlimited]
Output voltage
[V]
Input voltage
Input voltage
Low
High
Output frequency
* The above applies when V/F control mode
selection parameter is set to "0" or "1".
the output voltage can be
prevented from exceeding
the in
p
ut volta
g
e.
Rated voltage
1
Rated voltage
×
[4: Supply voltage corrected,
output voltage unlimited]
Output voltage
[V]
Input voltage
Low
High
Output frequency
* Even if is set for an output voltage lower than the
input voltage, the output voltage will exceed the voltage
adjusted by when the output frequency is higher
than the base frequency 1 .
The settings to " " and " " [supply voltage corrected (off during deceleration)] mean the same op-
eration as those to "
" and " ", respectively, except during deceleration. These settings prevent overvolt-
age during deceleration, while minimizing decreases in low-speed operating torque due to changes in volt-
age.