194 CHAPTER 13: MSTP CONFIGURATION
f Add the trunk port to all VLANs.
[S5500-Ethernet1/0/1] port trunk permit vlan all
Notes:
■ You must enable STP on a device before enabling the BPDU tunnel function on it.
■ The BPDU tunnel function is only available to access ports.
■ To implement the BPDU tunnel function, the links between operator networks
must be trunk links.
■ As the VLAN VPN function is unavailable to the ports with 802.1x, GVRP, GMRP,
STP, or NTDP employed, the BPDU tunnel function is unavailable to these ports.
This chapter contains configuration information to create VLANs in batches,
protocol-based VLANs and voice VLANs.