Filter
Top Products
378 CHAPTER 19: ACL CONFIGURATION
Importing ACL
Import the defined ACL into the commands with SNMP community, username and
group name configured, to achieve ACL control over SNMP users.
Perform the following configurations in System View.
Table 401 Importing ACL
SNMP community is one of the features of SNMP v1 and SNMP v2, so you import the
ACL into the commands with SNMP community configured, for the SNMP V1 and
SNMP V2.
SNMP username or group name is one of the features of SNMP V2 and above,
therefore you import the ACL into the commands with SNMP username or group
name configured, for the SNMP V2 and above. If you import the ACL into both
features, the Switch will filter both features for the users.
You can import different ACLs in the three commands listed above.
See the Command Manual for details about these commands.
You can import only the basic ACLs with digit IDs.
Operation Command
Import the defined ACL into
the commands with SNMP
community configured
snmp-agent community { read | write }
community_name [ [ mib-view view_name ] | [ acl
acl_number ] ]*
Import the defined ACL into
the commands with SNMP
group name configured
snmp-agent group { v1 | v2c } group_name [
read-view read_view ] [ write-view write_view ]
[ notify-view notify_view ] [ acl acl-number ]
snmp-agent group v3 group_name [ authentication
| privacy ] [ read-view read_view ] [
write-view write_view ] [ notify-view
notify_view ] [ acl acl_number ]
Import the defined ACL into
the commands with SNMP
username configured
snmp-agent usm-user { v1 | v2c } user_name
group_name [ acl acl_number ]
snmp-agent usm-user v3 user_name group_name [
authentication-mode { md5 | sha }
auth_password ] [ privacy-mode des56
priv_password ] [ acl acl_number ]