Filter
Top Products
490 CHAPTER 22: FILE SYSTEM MANAGEMENT
You can use the following commands to add/delete an entry to/from the alarm table.
Perform the following configuration in System View.
Table 558 Add/Delete an Entry to/from the Alarm Table
Adding/Deleting an Entry to/from the Event Table
RMON event management defines the event ID and the handling of the event by
keeping logs, sending trap messages to NMS or performing both at the same time.
You can use the following commands to add/delete an entry to/from the event table.
Perform the following configuration in System View.
Table 559 Add/Delete an Entry to/from the Event Table
Adding/Deleting an Entry to/from the History Control Terminal
The history data management helps you set the history data collection, periodical
data collection and storage of the specified ports. The sampling information includes
the utilization ratio, error counts and total number of packets.
You can use the following commands to add/delete an entry to/from the history
control terminal.
Perform the following configuration in Ethernet Port View.
Table 560 Add/Delete an Entry to/from the History Control Terminal
Adding/Deleting an Entry to/from the Extended RMON Alarm Table
You can use the command to add/delete an entry to/from the extended RMON alarm
table. Perform the following configuration in System View.
Operation Command
Add an entry to the alarm table. rmon alarm entry-number alarm-variable
sampling-time { delta | absolute }
rising-threshold threshold-value1
event-entry1 falling-threshold
threshold-value2 event-entry2 [ owner text
]
Delete an entry from the alarm table. undo rmon alarm entry-number
Operation Command
Add an entry to the event table. rmon event event-entry [ description string
] { log | trap trap-community | log-trap
log-trapcommunity | none } [ owner
rmon-station ]
Delete an entry from the event table. undo rmon event event-entry
Operation Command
Add an entry to the history
control terminal.
rmon history entry-number buckets number interval
sampling-interval [ owner text-string ]
Delete an entry from the
history control terminal.
undo rmon history entry-number