Filter
Top Products
374 CHAPTER 19: ACL CONFIGURATION
■ Port-based mode: The Switch delivers the traffic actions in the QoS profile directly
to the user port.
Perform the following configuration in Ethernet Port View.
Table 395 Configuring Profile Application Mode
By default, port-based mode is enabled on the port.
Applying QoS Profile to
the Port
With this configuration, you can apply all traffic actions in the QoS profile to the
current port.
In System View
In System View, you can apply the QoS profile to one or more consecutive ports.
Table 396 Applying QoS Profile to the Port in System View
In Ethernet Port View
In Ethernet Port View, you can only apply the QoS profile to the current port.
Table 397 Applying QoS Profile to the Port in Ethernet Port View
You cannot delete the specific QoS profile once you apply it to the port.
Displaying and Debugging QoS Profile Configuration
Use the
display command in any view to check the configuration result of the QoS
profile.
Table 398 Displaying QoS Profile Configuration
QoS Profile
Configuration Example
Networking Requirement
The Switch implements the QoS profile function for the accessed user.
Operation Command
Configure the user-based mode on the port qos-profile user-based
Restore the default (port-based) mode on
the port
undo qos-profile profile_name
Operation Command
Apply the QoS profile
to the port
apply qos-profile profile_name interface {
interface_name | interface_type interface_num } [ to
interface { interface_name | interface_type
interface_num } ]
Remove the
configuration
undo apply qos-profile profile_name interface {
interface_name | interface_type interface_num } [ to
interface { interface_name | interface_type
interface_num } ]
Operation Command
Apply the QoS profile to the port apply qos-profile profile_name
Remove the configuration undo apply qos-profile profile_name
Operation Command
Display QoS profile
configuration
display qos-profile { all | name profile_name |
interface { interface_name | interface_type
interface_num } | user user_name }