Filter
Top Products
470 CHAPTER 22: FILE SYSTEM MANAGEMENT
Note that there is a slash ('/') between module name and severity.
5 Severity
Switch information falls into three categories: log information, debugging
information and trap information. The info-center classifies every kind of information
into 8 severity or urgent levels. The log filtering rule is that the system prohibits
outputting the information whose severity level is greater than the set threshold. The
more urgent the logging packet is, the smaller its severity level. The level represented
by “emergencies” is 1, and that represented by ”debugging” is 8. Therefore, when
the threshold of the severity level is “debugging”, the system will output all the
information.
Definition of severity in logging information is in Table 521.
IP IP module
IPC Inter-process communication module
IPMC IP multicast module
L2INF Interface management module
LACL LANswitch ACL module
LQOS LANswitch QoS module
LS Local server module
MPM Multicast port management module
NTP Network time protocol module
PPRDT Protocol packet redirection module
PTVL Driver port, VLAN (Port and VLAN) module
QACL QoS/ACL module
QOSF Qos profile module
RDS Radius module
RM Routing management
RMON Remote monitor module
RSA Revest, shamir and adleman encryption system
RTPRO Routing protocol
SHELL User interface
SNMP Simple network management protocol
SOCKET Socket
SSH Secure shell module
STP Spanning tree protocol module
SYSMIB System MIB module
TELNET Telnet module
UDPH UDP helper module
VFS Virtual file system module
VTY Virtual type terminal module
WCN Web management module
XM XModem module
Table 520 Module Names in Logging Information
Module name Description