Filter
Top Products
478 CHAPTER 22: FILE SYSTEM MANAGEMENT
Perform the following operation in User View:
Table 537 Enabling Terminal Display Function
Sending the Information
to Telnet Terminal or
Dumb Termina
l
To send information to a Telnet terminal or dumb terminal, follow the steps below:
1 Enabling info-center
Perform the following operation in System View.
Table 538 Enable/Disable Info-Center
Info-center is enabled by default. After info-center is enabled, system performances
are affected when the system processes much information because of information
classification and outputting.
2 Configuring to output information to Telnet terminal or dumb terminal
Perform the following operation in System View.
Table 539 Configuring to Output Information to Telnet Terminal or Dumb Terminal
3 Configuring information source on the Switch
With this configuration, you can define the information that is sent to the Telnet
terminal or dumb terminal that is generated by which modules, information type,
information level, and so on.
Perform the following operation in System View:
Table 540 Defining Information Source
Operation Command
Enable terminal display function of debugging
information
terminal debugging
Disable terminal display function of debugging
information
undo terminal debugging
Enable terminal display function of log information terminal logging
Disable terminal display function of log information undo terminal logging
Enable terminal display function of trap information terminal trapping
Disable terminal display function of trap information undo terminal trapping
Operation Command
Enable info-center info-center enable
Disable info-center undo info-center enable
Operation Command
Output information to Telnet terminal or dumb
terminal
info-center monitor channel {
channel-number | channel-name }
Cancel the configuration of outputting
information to Telnet terminal or dumb terminal
undo info-center monitor channel
Operation Command
Define information source info-center source { modu-name | default } channel
{ channel-number | channel-name } [ { log | trap |
debug }* { level severity | state state }* ]
Cancel the configuration
of information source
undo info-center source { modu-name | default }
channel { channel-number | channel-name }