Filter
Top Products
File Attribute Configuration 439
File Attribute
Configuration
You can assign the main/backup attribute to a file so as to use this file as the
main/backup startup file upon next startup of switch, check the main and backup
files, and toggle between the main and backup attributes of file.
You can use an App, BootROM, or Web file on one unit in the fabric to update all
other units in the fabric. You can easily update the key software (including App,
BootROM and Web) on the whole fabric through CLI (command line interface).
Perform the following operations in user view (among which, the display commands
can be executed in any view).
You can assign the main/backup attribute to a file on the whole fabric only when the
file exists in all the switches of the fabric.
The assignment of the main or backup attribute to a Web file takes effect
immediately without the need of restarting the switches.
Currently, the configuration files use .cfg as the extension names, and are stored in
the root directory of the storage.
Table 473 Assign attributes to files
Operation Command Description
Assign the main attribute to a file so
as to use this file as the main boot
file upon next startup
boot boot-loader
file-url [ fabric ]
Optional
Assign the backup attribute to a file
so as to use this file as the backup
boot file upon next startup
boot boot-loader
backup-attribute
file-url [ fabric ]
Optional
Assign the main or backup attribute
to a Web file so as to use this file as
the main or backup Web file upon
next startup.
boot web-package
webfile { backup | main
}
Optional
Assign the main or backup attribute
to a configuration file so as to use
this file as the main or backup
configuration file upon next startup.
startup
saved-configuration
cfgfile [ backup | main ]
Optional
Executing this command with
neither backup nor main
keyword will assign the main
attribute to the configuration
file by default.
Configure the switch(es) to use null
configuration file upon next startup
undo startup
saved-configuration [
unit unit-id ]
Optional
Toggle between the main and
backup attributes of file
boot attribute-switch {
all | app |
configuration | web }
Optional
Enable the user to enter the main
Boot Menu with customized
password
startup bootrom-access
enable
Optional
By default, the user is disabled
from entering the main Boot
Menu with customized
password.
Display the information about the
App boot files
display boot-loader [
unit unit-id ]
Optional
You can execute the display
commands in any view.
Display the information about the
startup configuration files
display startup [ unit
unit-id ]