Filter
Top Products
Terminating the FTP Connection of a Specified User 461
Terminating the FTP
Connection of a
Specified User
By using the following command, the network administrator can forcibly terminate
the FTP connection of a specified user on the FTP server, in order to secure the
operation of the network.
Restarting the Switch You can use the following command in user view to restart your switch when your
switch is in trouble or needs to be restarted.The system will check whether there is
any configuration change before it restarts, and will ask whether you want to
proceed or not if there is any change, to prevent you from losing your original
configuration due to forgetting after the restart.
Displaying the State
and Information of
the System
The display commands can be classified as follows according to their functions.
■ Commands for displaying the system configuration information
■ Commands for displaying the system running state
■ Commands for displaying the system statistics information
For the display commands related to each protocol and different ports, refer to the
relevant chapters. The following
display commands are used for displaying the
system state and the statistics information.
Configuration agent is one of the XRN features. You can log into one Switch of the
Fabric to configure and manage the Fabric. The functions of the configuration agent
include:
■ Distributing configuration commands to the right destination Switches or
processing modules based on the resolution result of the commands input.
■ Sending output information of the commands from the Switch you have logged
into to your terminal.
■ Supporting simultaneous configuration of multiple users.
You cannot configure the configuration agent, but can view the statistics of the
configuration agent.
Perform the following operations in all views.
Table 512 Terminate the FTP connection of a specified user
Operation Command Description
Enter system view system-view —
Terminate the FTP connection of a specified
user on the FTP server
ftp disconnect
user-name
Required
Table 513 Restart the switch
Operation Command Description
Restart the switch reboot [ unit unit-id ] —
Table 514 The Display Commands of the System
Operation Command
Display the system clock display clock
Display the system version display version
Display the saved-configuration display saved-configuration