Filter
Top Products
FTP Lighting Configuration 519
Enabling FTP Server on Switch
After FTP server is enabled on an SWITCH 5500 switch, the seven-segment digital LED
on the front panel of the switch will rotate clockwise when an FTP client is uploading
file to the FTP server (the SWITCH 5500 switch), and will stop rotating when the file
uploading is finished, as show in Figure 145.
Figure 145 7Clockwise rotating of the seven-segment digital LED
Table 586 Upload file from an FTP client to the switch acting as FTP server
Device Operation Command Description
FTP client Log into the
remote FTP
server
Required
For detailed configuration, refer to the
configuration instruction relevant to FTP
client.
Upload file from
the FTP client to
the FTP server
Required
For detailed configuration, refer to the
configuration instruction relevant to FTP
client.
FTP server
(SWITCH
5500)
Enable FTP server ftp sever enable Required
By default, FTP server is disabled.
Add a local user
and enter local
user view
local-user
user-name
Required
Set a password
for the local user
password { simple
| cipher } password
Required
Set the password
display mode of
local users
local-user
password-display
-mode { auto |
cipher-force }
Optional
By default, this mode is auto (that is, the
switch displays user passwords in the
modes adopted when the passwords are
set).