Filter
Top Products
202 CHAPTER 15: SSH TERMINAL SERVICES
Configuring supported protocols
When SSH protocol is specified, to ensure a successful login, you must configure the
AAA authentication using the authentication-mode scheme command.
The protocol inbound ssh configuration fails if you configured
authentication-mode password and authentication-mode none. When you
configured SSH protocol successfully for the user interface, then you cannot
configure authentication-mode password and authentication-mode none any more.
Generating or destroying RSA key pairs
The name of the server RSA key pair is in the format of switch name plus _host,
S5500_host for example.
After you use the command, the system prompts you to define the key length.
■ In SSH1.x, the key length is in the range of 512 to 2,048 (bits).
■ In SSH 2.0, the key length is in the range of 1,024 to 2,048 (bits). To make SSH 1.x
compatible, 512 to 2,048-bit keys are allowed on clients, but the length of server
keys must be more than 1,024 bits. Otherwise, clients cannot be authenticated.
For a successful SSH login, you must generate the local RSA key pairs first.
You just need to execute the command once, with no further action required even
after the system is rebooted.
If you use this command to generate an RSA key provided an old one exits, the
system will prompt you to replace the previous one or not.
As a fabric contains multiple devices, you need to execute the rsa local-key-pair
create command first to make sure all the devices in the fabric share one RSA
local-key pair.
Table 180 Configure supported protocols
Operation Command Description
Enter system view system-view -
Enter one or multiple user
interface views
user-interface [ type-keyword ]
number [ ending-number ]
Required
Configure the protocols supported
in the user interface view(s)
protocol inbound { all |ssh |
telnet }
Optional
By default, the system
supports both Telnet and
SSH.
Table 181 Generate or destroy RSA key pairs
Operation Command Description
Enter system view system-view -
Generate a local RSA key pair rsa local-key-pair create Required
Destroy a local RSA key pair rsa local-key-pair destroy Required