Filter
Top Products
362 CHAPTER 19: ACL CONFIGURATION
Configuration example for setting priority of a protocol packet
1 Change OSPF protocol packets’ IP priority to be 3.Enter system view.
<S5500> system-view
[S5500]
2 Set OSPF protocol packets’ IP priority to be 3.
[S5500] protocol-priority protocol-type OSPF ip-precedence 3
3 Display the priority of protocol packets.
[S5500] display protocol-priority
Setting Port Mirroring Port mirroring means duplicating data on the monitored port to the designated mirror
port, for purpose of data analysis and supervision.
The Switch supports one monitor port and one mirroring port. If several Switches
form a Fabric, only one monitor port and one mirroring port can be configured in the
Fabric.
Configure Port Mirroring
1 Configure monitor port
Perform the following configuration in the Ethernet Port View.
Table 371 Configure Monitor Port
Only one monitor port can be configured on one Switch. If a group of Switches form
a fabric, only one monitor port can be configured on one fabric.
2 Configure the mirroring port.
Perform the following configuration in the Ethernet Port View.
Table 372 Configure Mirroring Port
Delete Port Mirroring
1 Delete mirroring port
Perform the following configuration in the Ethernet Port View.
Table 373 Delete Mirroring Port
2 Delete monitor port.
Perform the following configuration in the Ethernet Port View.
Table 374 Delete Monitor Port
Configuring Traffic
Mirroring
The function of traffic mirroring is to copy the traffic matching an ACL rule to the
designated observing port to analyze and monitor the packets.
Operation Command
Configure a monitor port monitor-port
Operation Command
Configure mirroring port mirroring-port { inbound | outbound | both }
Operation Command
Delete a mirroring port undo mirroring-port { inbound | outbound | both }
Operation Command
Delete monitor port undo monitor