Filter
Top Products
574 CHAPTER 29: SOURCE IP ADDRESS CONFIGURATION
If the ip-addr in the command is not an address of the device, your configuration fails.
If you specify a non-existent interface in the command, your configuration fails.
Displaying the Source
IP Address
Configuration
Use the display commands in any view to display the source IP address configuration
for service packets.
Specify source IP address for the SFTP
client
sftp source-ip ip-addr Optional
Specify source interface for the SFTP
client
sftp source-interface interface-type
interface-number
Optional
Table 632 Configure source IP address for service packets (continued)
Operation Command Remarks
Table 633 Display the source IP address configuration
Operation Command
Display the source IP address of the FTP server display ftp-server source-ip
Display the source IP address of the FTP client display ftp source-ip
Display the source IP address of the TFTP client display tftp source-ip
Display the source IP address of the Telnet server display telnet-server source-ip
Display the source IP address of the SSH server display ssh-server source-ip
Display the source IP address of the SSH2 client display ssh2 source-ip
Display the source IP address of the SFTP client display sftp source-ip