AMD LX 700@0.8W Computer Hardware User Manual


 
AMD Geode™ LX Processors Data Book 451
Video Processor Register Descriptions
33234H
6.8.3.42 Video Coefficient RAM (VCR)
6.8.3.43 Panel Timing Register 1 (PT1)
VP Memory Offset 1000h-1FFFh
Typ e R /W
Reset Value xxxxxxxx_xxxxxxxxh
VCR Register Map
63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
VC3 VC2
313029282726252423222120191817161514131211109876543210
VC1 VC0
VCR Bit Descriptions
Bit Name Description
63:48 VC3 Coefficient 3. Coefficient for tap 3 of filter.
47:32 VC2 Coefficient 2. Coefficient for tap 2 of filter.
31:16 VC1 Coefficient 1. Coefficient for tap 1 of filter.
15:0 VC0 Coefficient 0. Coefficient for tap 0 of filter.
VP Memory Offset 400h
Typ e R /W
Reset Value 00000000_00000000h
PT1 Register Map
63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
RSVD
313029282726252423222120191817161514131211109876543210
RSVD
FP_VSYNC_POL
FP_HSYNC_POL
RSVD
HSYNC_SRC
RSVD
HSYNC_DELAY
HSYNC_PLS_WIDTH
PT1 Bit Descriptions
Bit Name Description
63:32 RSVD (RO) Reserved (Read Only). Reads back as 0.
31 RSVD Reserved. This bit is not defined.
30 FP_VSYNC_
POL
FP_VSYNC Input Polarity. Selects positive or negative polarity of the FP_VSYNC input.
Program this bit to match the polarity of the incoming FP_VSYNC signal. Note that FP
Memory Offset 408h[23] controls the polarity of the output VSYNC.
0: FP_VSYNC is normally low, transitioning high during sync interval. (Default)
1: FP_VSYNC is normally high, transitioning low during sync interval