Filter
Top Products
EPSON Stylus Pro 7600/9600 Revision A
Disassembly & Assembly Disassembly and Assembly of Ink Supply Mechanism 197
4.5.3 Cover Sensor ASSY
1.
Remove the L Side Cover. (p.163)
2.
Remove the I/H Cover. (p.164)
3. Open the Front Cover.
4. Remove two screws (CPP: M3
×
8) securing the Ink Tube Cover and remove the cover.
(See Figure 4-63)
5. Disconnect the harness connector of the Cover Sensor ASSY.
6. Pinch the right and left hooks of the Cover Sensor ASSY and remove the Cover Sensor
ASSY.
Figure 4-71. Removing the Cover Sensor ASSY
A D J U S T M E N T
R E Q U I R E D
Make sure that the Cover Switch Holder is so positioned that the
Cover Sensor ASSY operates coupled with the opening/closing of
the Front Cover.
Refer to “5.1.4.9 Cover Sensor ASSY Adjustment” (p.216)
Cover Sensor ASSY
Connector