Filter
Top Products
EPSON Stylus Pro 7600/9600 Revision A
Product Description Operating Panel 44
1.4.3.12 Cutter position adjustment
Cutter position can be adjusted with this mode. Cutter position adjustment pattern is
printed, and the cutter is adjusted with cutter position number entered by users.
NOTE: This adjustment is effective for top/bottom no margin print.
Setting procedure
1. Set paper.
2. Enter Cutter position adjustment menu with the panel.
3. Print cutter position adjustment pattern.
4. Select the best pattern number and enter the number.
NOTE 1: When “1 cut” is selected with panel, it is not operated.
2:
Setting value can be selected from 1 to 17 with “Paper Feed” button.
Level structure of Cutter position adjustment menu
Cutter position adjustment pattern
Output paper size : A4
Font : Built-in font
Print sample : See following picture.
Figure 1-10. Cutter position adjustment pattern
Number in print pattern and cutter position
1.4.3.13 Auto margin refresh
When this setting is ON, paper edge is automatically cut to prevent print dirt after 4
sides no margin print. The cutting length is depends on the minimum cut length at this
time.
Enter
CUTTER ADJ
*8
CUTTER ADJ
EXEC
PRINTING ALGNMNT
PATTERN
SelecType
PRINTER SETUP
CUTTER ADJ
Paper Source
SelecType
PRINTER SETUP
Paper Source
SelecType
READY
Paper Source
Pause
Number in print pattern 1 2 3 ... ... 15 16 17
Adjustment value ... ...