Filter
Top Products
EPSON Stylus Pro 7600/9600 Revision A
Disassembly & Assembly Disassembly and Assembly of Cleaning Mechanism 199
4.6.1 Maintenance ASSY Removal
1.
Remove the R Side Cover. (p.160)
2.
Remove the Access Cover. (See
Removing the Access Cover on page 167)
3. Disconnect the connector (CN17) of the Pump Motor ASSY.
4. At the rear of the printer body, remove the four screws securing the Maintenance
ASSY, and remove the Maintenance ASSY from the printer body.
(See Figure 4-72)
Figure 4-72. Removing the Maintenance ASSY
Figure 4-73. Maintenance ASSY
C H E C K
P O I N T
When you replace the Maintenance ASSY, ink can spill from the
ink tube connected to the pump assembly. Disconnect the ink tubes
carefully so that ink will not spill.
After installing the Maintenance ASSY, insert the waste ink tube
(thin) of the Pump Motor ASSY into the waste ink tube (thick) of
the Flushing Box ASSY to the depth using tweezers.
Waste ink tube (thin)
Pump ASSY
Flushing Box ASSY
Screw x4
Maintenance
ASSY
Valve ASSY
Cap ASSY (p.200)
Pump Motor ASSY
(p.200)
Pump ASSY
(p.201)
Waste ink tube
Cleaner Head (Wiper) (p.203)