Filter
Top Products
EPSON Stylus Pro 7600/9600 Revision A
Adjustment Self-diagnostic Function 236
Pigment Code Input
After ink filling, the display returns to the adjustment top menu.Pigment Code
Input
In this mode, input a pigment code by operating on the panel.
The cursor is displayed at the position where a digit is currently input.
Press [Cleaning] key to shift the cursor (pointing out the input item) to the
right.
The cursor moves to the left end when [Cleaning] key is pressed at the right
end.
After ink charge, the display returns to the adjustment top menu.
Press the [Pause] key to return to the previous level in the hierarchy.
In doing so, note that the input code is valid but it has not been registered yet.
The cursor skips the item displayed with “\”.
At input for “Pigment-1” “Pigment-2” or “Pigment-3”, press the [Enter] key
to enter the input line selection mode, which is the immediately upper level in
the hierarchy.
5.2.3.4 Write D/A Value
Figure 5-26. Menu Transition of Code Input
C A U T I O N
Stylus Pro 7600/9600 does not incorporate this function. Do not try
to execute this operation on the service site.
Pigment–1
266432F
[Paper Feed
∆
] Key: +
[Paper Feed
∇
] Key: –
Pigment–2
44WM2Q3
Pigment–3
QVVWUVR
Exc.EnterKey Fill
[Enter]
Press [Pause] key for transition to the adjustment top menu.
Please Set Ink
[Enter]
Displayed when the cartridge has not been installed.
INK CHARGING
Pigment–4
S01S0
\\
[Enter]
[Paper Feed
∆
] Key: +
[Paper Feed
∇
] Key: –
[Paper Feed
∆
] Key: +
[Paper Feed
∇
] Key: –
[Paper Feed
∆
] Key: +
[Paper Feed
∇
] Key: –