Filter
Top Products
EPSON Stylus Pro 7600/9600 Revision A
Adjustment Self-diagnostic Function 261
5.2.6.1 Parameter Initialize
Execute parameter initialization.
C H E C K
P O I N T
Without replacing the relevant parts, never use this function to
initialize the counter; otherwise, control after that will not agree
with the condition of the printer mechanism.
Table 5-28.
Item Contents
All initialization
CR motor round trip count
PF motor travel
Head ink discharge count (Each color)
Cleaning count
The number of printed sheets
Ink volume counter
Waste ink counter
Cutting count
Gap adjustment value
CR origin compensation value (Capping position)
PF origin compensation value
Head slide origin compensation value
Front sensor position compensation value
Rear sensor position compensation value
Edge sensor longitudinal position compensation value
Edge sensor lateral position compensation value
Cutter longitudinal position compensation value
Flushing position
PF distance correction 1 ~ 3
Serial number
Wiping count
Rubbing count
Ink tube round trip count
Paper presser lever up and down count
Cover Open/Close count
Ink lever up and down count
Capping position initialization CR origin compensation value (Capping position)
PF resolution initialization PF distance correction1 ~ 3
Serial number initialization Serial number
Head record initialization Head ink discharge count (Each color))
Wiper record initialization Wiping count
Rubbing record initialization Rubbing count
Waste ink record initialization Waste ink counter
CR motor record initialization CR motor round trip count
PF motor record initialization PF motor travel
Lever record initialization Paper presser lever up and down count
Cover record initialization Cover Open/Close count
Ink lever record initialization Ink lever up and down count
Table 5-28.
Item Contents