Filter
Top Products
EPSON Stylus Pro 7600/9600 Revision A
Product Description Interfaces 96
1.6.3 Optional Interface
Type-B interface (level 2, 1200mA type) is supported.
REPLY MESSAGE
(Case of using Type-B I/F card except above)
Card in Type-B slot 1:
Main-Type
Stylus Pro 7600:
MT48p,PW240cl10cpi,PRG(BNxxxx)rev,AP800ma,SPD0fast,GDI
Stylus Pro 9600:
MT48p,PW440cl10cpi,PRG(BWxxxx)rev,AP800ma,SPD0fast,GDI
NOTE: xxxx is F/W version.
Product-Name: <Stylus Pro 7600-DYE/Stylus Pro 9600-DYE>
Emulation-Type : ESCPL2-00
Entity-Type : EPSONLQ2
REPLY FOR OPTION COMMAND
Table 1-58. Reply List
Option command
number
Command name Reply-A Reply-B
00h No-operation Accept None
01h Start Hardware Reset Accept Execute OK
02h Start Software Reset Reject
03h Send Main System Type Accept
04h Send Name Data Reject
05h Inquire Name Data Accept
06h Send Product Name Accept
07h Send Software Emulation Type Accept
08h Complete Buffered Data Accept Check Condition
09h Stop Procedure Reject Execute OK
0Ah Return Buffered Data Reject
0Bh Send Entity Type Accept
0Ch Send Status Accept
0Dh Quit Procedure Reject
0Eh Inquire ASCII Message Reject
0Fh Send ASCII Message Accept None
10h-13h Unknown None
14h Inquire Emergency Message Accept Execute OK
15h Send Emergency Reply Accept
16h-1Fh Unknown None
20h-FFh Reserved None