Filter
Top Products
EPSON Stylus Pro 7600/9600 Revision A
Adjustment Mechanism Adjustment 264
5.3.3 PF Timing Belt Tension Adjustment
This adjustment is necessary for service operations that require you to remove/loosen
the PF Motor or PF Belt. When replacing or re-installing the PF Belt, you need to
confirm the tension of the PF Belt.
Adjusting tools: Tension Gauge #F770
Standard: 2,200g ± 10%
(Tension in the PF motor mounting plate moving direction.)
NOTE: For disassembly and assembly procedure, refer to “PF Motor (p.185)”.
Loosen the screws (x4) fixed to the PF motor mounting board and set the tension gauge
to the hole on the board and pull to the movable direction.
Figure 5-65. PF Belt Tension Adjustment
2.200g ± 10%
Fixed screws
Fixed screws