Filter
Top Products
EPSON Stylus Pro 7600/9600 Revision A
Product Description Operating Panel 40
1.4.3.3 PG Setting
Selecting this mode allows the user to set the platen gap. The relationship between
panel setting, command setting (SN command), and actual platen gap position is shown
below.
Note 1: Only in this case, SN command is ignored. When paper thickness is 0.15mm, it is
operated with minimum Bi-D value and minimum SN(PG).
2: When “Wide” or “Wider” is set, “W” is displayed on the left side of LCD lower line.
3: When “Narrow” is set, “N” is displayed on the left side of LCD lower line.
Table 1-29. PG Setting Values
Paper thickness
sensor
PH
command
Panel SN command
Actual PG
position
Note
Less than 0.3mm 00H Narrow - Minimum
*1
Standard Minimum
*1
Wide Small
Wider Middle
01H-06H Narrow Minimum Minimum
Small Minimum
Middle Small
Big Middle
Standard Minimum Minimum
Small Small
Middle Middle
Big Big
Wide Minimum Small
Small Middle
Middle Big
Big Big
Wider Minimum Middle
Small Big
Middle Big
Big Big
07H-12H - - Big
More than 0.3mm
Less than 0.7mm
00H-06H Narrow Minimum Small
Small Small
Middle Small
Big Middle
Standard Minimum Small
Small Small
Middle Middle
Big Big
Wide Minimum Small
Small Middle
Middle Big
Big Big
Wider Minimum Middle
Small Big
Middle Big
Big Big
07H-12H - - Big
More than 0.7mm - - - Big
Table 1-29. PG Setting Values (continued)
Paper thickness
sensor
PH
command
Panel SN command
Actual PG
position
Note