Filter
Top Products
EPSON Stylus Pro 7600/9600 Revision A
Adjustment Self-diagnostic Function 245
5.2.3.11 Platen Position Checking
Check the adjusted position of each sponge on the platen.
Make certain that the printed pattern agrees with the right and left positions of
each sponge position.
Pattern drawing method: 360dpi, Uni-D, 240CPS, VSD2, Large
Figure 5-40. Menu Transition for Platen Position Checking
Figure 5-41. Print Pattern for Platen Position Checking
[Enter] Adjust Print
Printing Pattern
Platen Pos. R:
?0.0mm
Adj :
Cut Adj.
[Enter]
[Paper Feed
∆
]Key: +
[Paper Feed
∇
]Key : –
*Setting is possible in increments of 0.1 mm.
Printing end
[Enter]