Filter
Top Products
EPSON Stylus Pro 7600/9600 Revision A
Product Description Operating Panel 63
GAP ADJUSTMENT PRINT PATTERN (TBD)
Print specifications
Print specifications of gap adjustment print pattern
Each adjustment item
Note *1: For Uni-D All (between-row compensation), make each adjustment with the K1 row
as the reference.
The adjustment pattern printing method for each adjustment item is as
follows:
The relationship between print pattern and adjustment gap is shown below.
Adjusting items 3 items (Refer to next clause for details)
Adjustment pattern height Bi-D Black (#1, #2, #3) 90mm
Bi-D All (#1, #2, #3) 220mm
Uni-D All (#1, #2, #3) 145mm
Adjustment pattern width Bi-D Black 65mm (24” 3set, 44” 5set)
Bi-D All 190mm (24” 3set, 44” 5set)
Uni-D All 185mm (24” 3set, 44” 5set)
Others When it prints from paper edge, it feeds 100mm for roll paper,
50mm for sheet, and starts printing.
Table 1-45. Adjustment Item List
Adjusting item
Parameter
Dot size Head speed (CPS) Nozzle No.
Bi-D All
#1
K1 VSD1 240 1
K2 VSD1 240 2
C VSD1 240 3
M VSD1 240 4
LC VSD1 240 5
LM VSD1 240 6
Y VSD1 240 7
#2
K1 VSD2 240 1
K2 VSD2 240 2
C VSD2 240 3
M VSD2 240 4
LC VSD2 240 5
LM VSD2 240 6
Y VSD2 240 7
#3
K1 VSD4 190 1
K2 VSD4 190 2
C VSD4 190 3
M VSD4 190 4
LC VSD4 190 5
LM VSD4 190 6
Y VSD4 190 7
Uni-D All*
1
#1
K2 VSD1 240 2
C VSD1 240 3
M VSD1 240 4
LC VSD1 240 5
LM VSD1 240 6
Y VSD1 240 7
#2
K2 VSD2 240 2
C VSD2 240 3
M VSD2 240 4
LC VSD2 240 5
LM VSD2 240 6
Y VSD2 240 7
#3
K2 VSD4 190 2
C VSD4 190 3
M VSD4 190 4
LC VSD4 190 5
LM VSD4 190 6
Y VSD4 190 7
Bi-D Black
#1 K1 VSD1 240 1
#2 K1 VSD2 240 1
#3 K1 VSD4 190 1
Print direction Bar: Going back and forth every 4dot
Block: Upper patterns: Leftward Lower patterns: Rightward
Pattern interval Upper patterns: equal interval
Lower patterns:Print No.5 to be always current setup value. No.5
is standard, and others have adjustment gap as
following;
Print pattern number 123456789
Adjustment gap N/1440 inch
(VSD1, VSD2, VSD4)
-4 -3 -2 -1 0 +1 +2 +3 +4
Table 1-45. Adjustment Item List (continued)
Adjusting item
Parameter
Dot size Head speed (CPS) Nozzle No.