Filter
Top Products
Tip: You can use display groups to group related systems under single tree object.
More information
v The menubar
v The toolbar
v The Physical and Logical device views
v The event viewer
v The status bar
Using
the ServeRAID Manager interface > Physical and Logical device views:
The Physical and Logical device views show the physical devices and logical
devices connected to the controller or enclosure.
The Physical devices view (on the left) displays information about the drives,
enclosures, and other devices attached to the controller. The devices are shown
organized by the channel or port they are connected to and shown in numerical
order. The display for each channel or port includes information on maximum
speed capability, the number of the channel on the controller, and the number of
devices attached to the controller.
The Logical devices view (on the right) displays information about the arrays and
logical drives created using the physical devices. This information includes the
number of arrays and logical drives, the RAID level of each device, and whether a
logical drive is protected by a hot spare drive.
To view device information, click
in the Enterprise view to expand a managed
system or management station. Then, select a controller or enclosure from the tree.
For network storage, the Physical devices view also shows the controllers in the
enclosure. All other information is the same.
92 ServeRAID Manager Installation and User's Guide