Filter
Top Products
Using the ServeRAID Manager agent
Starting the ServeRAID Manager agent
The ServeRAID Manager agent is a monitoring agent for ServeRAID controllers
that uses less memory than the ServeRAID Manager graphical user interface (that
is, the console). You can manage and configure a server running the agent through
a ServeRAID Manager console running on another system.
Note: If the system administrator chose during installation to start the agent as a
background service (daemon), the agent is already running. Verify that the
agent is not running before performing this procedure.
Use the following procedure to start the ServeRAID Manager agent on your
system.
Windows
On Windows systems, the ServeRAID Manager agent is installed as a background
service. It starts automatically when the system is started. To start the agent
manually, use the Windows Administrative tools. See Verifying that the agent is
running.
OS/2
To start the ServeRAID Manager agent on a Windows or OS/2 system:
1. Change to the directory where you installed the ServeRAID Manager program
by typing:
cd \RaidMan
2. Press Enter.
3. Type the following:
RaidAgnt
4. Press Enter.
NetWare
To start the ServeRAID Manager agent on NetWare:
1. From the NetWare console, type the following:
LOAD RaidAgnt
2. Press Enter.
OpenServer, UnixWare, and Open UNIX
To start the ServeRAID Manager agent on OpenServer, UnixWare, and Open UNIX:
1. Change to the directory where you installed the ServeRAID Manager program
by typing one of the following:
For OpenServer cd /opt/RaidMan
For UnixWare or Open UNIX cd /opt/RaidMan
2. Press Enter.
206 ServeRAID Manager Installation and User's Guide