Filter
Top Products
v Synchronize logical drive
v Enable read-ahead cache
v Expand or change logical drive
v If a logical drive is blocked, unblock logical drive
v Identify logical drive [number]
v Create FlashCopy
v Remove FlashCopy
The following actions are supported for networked storage only (enclosures):
v Configure access control list
v Configure target information
v Increase logical drive capacity
The following action is supported in bootable-CD mode only, except for
ServeRAID-8i and ServeRAID-7t controllers:
v Change write-cache mode to write back or write through
Channel
[number] object: Use this object, in the Physical devices view, to work
with a selected SCSI channel or to display its properties:
Notes:
1. A controller supports a maximum of four SCSI channels.
2. The ServeRAID-5i controller does not support tape drives and physical
drives on the same channel.
Possible
subobject
v
(Physical drive)
v
(Hot-spare drive)
v
(Enclosure management device)
v
(CD-ROM drive)
v
(Tape drive)
v
(Removable drive)
Warning
and error conditions
None.
Actions
v Scan for new or removed ready drives
v Identify all physical drives on SCSI channel [number]
The
following action is available only in bootable-CD mode:
Chapter 4. Managing ServeRAID devices 135