Filter
Top Products
In the graphical views, if the logical drive uses only part of the available storage,
only those segments are highlighted, using the following color code:
dark blue - storage used by selected logical drive
brown - storage used by other logical drives
light blue - free space (not used by any logical drive)
gray - space reserved for RAID signature
Note: Partially filled hard drive
and array
icons indicate that the device
has free space.
More information
v Icons, buttons, and status indicators
v Physical device view options
v Collapsed and expanded views
Sending a test trap from the SNMP Trap Manager
Use this action to send a test trap to a remote system.
1. Click a system in the SNMP traps list.
Note:
This action is disabled if you do not select a system.
2. Click Actions → Send test trap.
Note:
The SNMP Trap Manager cannot verify that the trap was received
successfully. You must verify that the trap was received on the remote
system. If the test fails, verify the following and try the test send again:
1. You typed the correct TCP/IP information when you added the system
to the traps list.
2. The SNMP console is running on the remote system.
Chapter 4. Managing ServeRAID devices 99